REPLACE FORWARD TRANSMISSION MAIN OIL FILTER ELEMENT
Remove four nuts (6) and washers (7). Remove
housing (3), gasket seal (8), and element (9).
Check outside of element (9) for debris. If there
is debris, perform a serviceability check of the
forward transmission (Task 6-112).
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Got
medical attention for eyes.
Clean inside of housing (3) with solvent (E162)
and clean cloths (E120). Wear gloves (E186).
Check that hole (10) is free of debris.
Hold housing (3) so that indicating button (11)
points straight up. Push in button to lock it down.