TM 55-1520-240-23-5
6-100
REMOVE ENGINE TRANSMISSION
(Continued)
6-100
NOTE
Procedure is similar to remove left or
right transmission. Right transmission
is shown here. Differences are noted
in steps.
1.
Remove nut (1), washers (2), and screw (3) from
clamp (4) connecting hose (5) to clip (6).
2.
Disconnect hose (5) from transmission (7).
3.
Disconnect two oil hoses (8 and 9) from
transmission (7). Drain oil into container.
3.1.
Remove nut (9.1) and screw (9.2) from
clamp (9.3) at lower lifting lug (9.4). Release
temperature and chip detector wire (9.5).
4.
Disconnect connector (10) from temperature and
chip detector (11).
4.1.
With 37 , disconnect connector (11.1) from chip
detector connector (11.2).
6-403