TM 55-1520-240-23-5
6-98
REMOVE ENGINE TRANSMISSION OUTPUT SHAFT OIL SEAL
6-98
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powertrain Repairers Tool Kit, NSN
5180-00-003-5267
Materials:
None
Personnel Required:
Aircraft Powertrain Repairer
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Engine Air Inlet Screen Removed (Task 4-65)
Engine Transmission Fairing Removed (Task 4-70)
Pylon Hinged Fairing Open (Task 2-2)
Pylon Lower Fairing Open (Task 2-2)
Engine Drive Shaft and Engine Transmission Adapter
Assembly Removed (Task 6-30)
NOTE
Procedure is similar to remove
seal from left or right transmission.
Removal of right transmission seal is
shown here.
Breather hose on left transmission
is held by one clamp. Hose on right
transmission is held by two clamps.
1.
Remove nut (1), washer (2), screw (3), and hose
clamp (4) from clip (5).
6-376