REMOVE AFT TRANSMISSION FROM STORAGE
Remove all tape and barrier material from
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flames. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Touching splines with bare fingers can
Remove corrosion preventive compound from
rotor shaft splines (18), input shaft splines (19),
and four bushings (20). Use dry cleaning solvent
(E162) and clean cloths (E120). Wear gloves
(E186) and goggles.
Push in drain valve (21), twist it, and pull. Let
residual oil drain into container. Push in valve,
twist it, and pull down to close.
Assemble aft transmission (Task 6-96).
END OF TASK