REMOVE AFT TRANSMISSION
Reach forward hoist eyes from cabin.
Reach aft hoist eyes from generator
access holes on each side of pylon.
Connect cables (33) of forward hoist (28) to two
forward hoist eyes (35) on transmission (3).
Connect cables of aft hoist (32) to two aft hoist
eyes (36) on transmission.
Operate hoists (28 and 32) to remove slack from
cables (33). Do not apply tension.
Disconnect wires from two generators
in same way. Reach generator
connections through access holes on
each side of pylon.
Remove two screws (37) from cover plate (38).
Tag and disconnect four wires (39) and connector
Route oil hoses through generator
Disconnect two oil hoses (41 and 42) from top of