TM 55-1520-240-23-5
6-2
REMOVE NO. 1 DRIVE SHAFT
(Continued)
6-2
6.
Lift adapter assembly (6) out of two brackets
(13). With aid of helper, withdraw shaft (4) from
helicopter structure (14). Remove shaft from
helicopter.
7.
If shaft (4) is being replaced, remove bushing
(7) from mount (15) on each side of adapter
assembly (6). Install bolt (16), special washer
(17) and nut (18) in adapter assembly.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
6-14