TM 55-1520-240-23-5
6-51
INSTALL FORWARD TRANSMISSION PACKAGE
(Continued)
6-51
7.
Coat shank and thread of four mounting bolts
(14) with grease (E190). Install four mounting
bolts in mounting holes (11). Use bolts as guide
pins to center holes (11) in lugs (12) with holes
(13) and barrel nut (13.1) in structure (10).
Do not force bolts. If bolts cannot be
installed by hand, transmission and
structure are not aligned. Bolts can
be damaged.
8.
Have helpers tighten each bolt (14) at least 7
turns by hand while slowly lowering transmission
(9). Shift transmission as needed for alignment.
When bolts are tight, relax tension on hoist (5).
Remove lines (8).
6-193