REMOVE FORWARD TRANSMISSION PACKAGE
Loosen forward bolt (52.6) as follows:
Install socket adapter (T93) (52.7) on forward
Install torque applicator (50) with large hole
over drive of socket adapter (52.7). Observe
THIS SIDE UP stamping on applicator.
Install right end of applicator (50) in center
block (50.1) of reactor (51). Install socket at
end of reactor on left bolt (49).
Install pin (51.2) through center block (50.1)
and applicator (50).
Install torque pack (T23) (52) on drive of
socket adapter (52.7). Rotate pack so that
two pins on bottom fit into holes (52.9) in
applicator (50). Use socket wrench speed
Turn speed handle counterclockwise until
torque is broken.
Turn speed handle clockwise until torque
indicator (52.10) reads 0 and torque pack is
Remove torque pack (52.8) and torque
reactor assembly (T159).