CLEAN AND INSPECT FORWARD TRANSMISSION OIL FILLER SCREEN
Check screen (2) for bits of metal and other
debris. Retain debris for contamination analysis
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Clean screen (2) with solvent (E162) and brush
(E86). Wear gloves (E186) and goggles. Dry
with cloth (E120) or let air dry.
Inspect screen (2) for tears. There shall be no
Open cap assembly (1). Install screen (2) in
neck (3) of filler.
Check packing (4) on underside of cap assembly
(1) for condition. There shall be no cuts or nicks.
Close cap assembly (1).
Close aft pylon doors (Task 2-2).
END OF TASK