REPAIR COMPOSITE WEATHER-PROTECTIVE COVER (AVIM)
Cut two pieces of fiberglass laminate (E168.1)
(18) to fit in cavity (16) over core (15).
Check that pieces (18) fit flush with cover (1).
Remove protective film from both sides of two
laminate pieces (18). Carefully pull at right angle
to direction of fibers.
Prepare mixture of adhesive. (Refer to steps 106
Coat underside of one piece (18) with adhesive.
Press piece against plug (15) in cavity (16).
Apply coat of adhesive to top of installed piece
(18) and underside of second piece. Install
second piece in cavity over first piece. Press
against piece to seat it flush with cover (1).