TM 55-1520-240-23-4
5-117.1
DISASSEMBLE AND INSPECT FWD AND AFT SWASHPLATE ASSEMBLY
BEARINGS (Continued)
5-117.1
DISASSEMBLE SWASHPLATE
1.
Prior to removing hardware, thoroughly clean all
upper seal surfaces by hand, using a clean lint
free cloth (E134.1).
CAUTION
Do not use solvent to clean grease
from bearing.
2.
For forward swashplate (1) only, remove seal (2)
as follows:
a.
Remove and discard 12 nuts (3) and washers
(4). Remove seal (2).
3.
For aft swashplate (5) only, remove seal (6) as
follows:
a.
Remove lockwire. Remove 12 bolts (7) and
washers (8). Remove seal (6).
Change 2
5-666.1