• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REPLACEMENT OF BEARINGS  IN  UPPER  DRIVE  ARM
DISASSEMBLE  LOWER DRIVE  ARM

TM-55-1520-240-23-4 CH-47D Heilcopter Manual
Page Navigation
  614    615    616    617    618  619  620    621    622    623    624  
TM  55-1520-240-23-4 5-107 REPLACEMENT OF BEARINGS  IN UPPER DRIVE  ARM (Continued) 5-107 1. Check  Teflon  coating  on  two  bearings  (1). Coating  shall  not be  torn,  scored, or  frayed. 2. Remove  two  bearings  (1)  from  upper  drive arm  (3).   Use  arbor  press  and  adapter  (TM 55-1500-322-24). NOTE Bushing  sleeves  114R3116-182  (2) are  not  replaceable. 3. Clean  bearing  seat  areas  (1)  of  lugs  (2).   Use cloth  (E120)  damp  with  dry  cleaning  solvent (E162).   Use  Kevlar  gloves  (E187). Do  not apply primer  to  inside  diameter or  flange  of bearings.  Bearing  coating will  be  damaged. 4. Apply  epoxy  primer  (E293)  to  bore  of  lugs  (2) and  outside  diameter  of bearings (3).  Use  Kevlar gloves (E187). 5. Press two  bearings  (3)  into  lugs (2).  Use  arbor press  and  adapter  (TM  55-1500-322-24). INSPECT FOLLOW-ON  MAINTENANCE: None END  OF  TASK 5-624







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.