TM 55-1520-240-23-4
5-86
CLEAN SHOCK ABSORBER VENT VALVE FILTER
(Continued)
5-86
3.
Remove retaining ring (5). Use retaining ring
pliers. Remove spacer (6) and filter element (7).
4.
Have filter element (7) cleaned ultrasonically.
NOTE
If ultrasonic equipment is not available,
filter element must be replaced.
5.
Check element (7) for damage. There shall be
no damage.
6.
Install element (7) and washer (6). Install
retaining ring (5). Use retaining ring pliers.
7.
Install cover bracket (4). Start nut (1) on
adjustment screw (3) by hand. Prevent
adjustment screw from turning. Use screwdriver.
Torque nut to 25 inch-pounds.
8.
Install lockwire (E231) from screw (3) to nut (1)
and body (2).
INSPECT
FOLLOW-ON MAINTENANCE:
Close work platforms (Task 2-2).
END OF TASK
5-521