• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REPAIR  TITANIUM  NOSE  CAP  CRACKS (AVIM) (Continued) - TM-55-1520-240-23-4_337
REPAIR  TITANIUM  NOSE  CAP  CRACKS (AVIM) (Continued) - TM-55-1520-240-23-4_339

TM-55-1520-240-23-4 CH-47D Heilcopter Manual
Page Navigation
  309    310    311    312    313  314  315    316    317    318    319  
TM  55-1520-240-23-4 5-66.2 REPAIR  TITANIUM  NOSE  CAP  CRACKS  (AVIM) (Continued) 5-66.2 21.1. Determine  the  finish  system  used  on  the  rotor blade  (TM  55-1500-344-23). a. For rotor blades without   58   proceed  to  step 22. b. For rotor  blades  with    58   proceed  to  Task 2-350.1. 22. Refinish  repair area  (27)  as  follows: a. Solvent  wipe  repair  area  (27).   Use  cloth (E120)  damp  with  acetone  (E20).   Wipe dry.   Use  clean  cloth  (E120).   Wear  gloves (E184.1). Epoxy primer (E292.1)  is  flammable and  toxic.   It  can  irritate  skin  and cause  burns.  Use  only with  adequate ventilation, away  from  heat or open flame.   Avoid  contact  with  skin,  eyes, or  clothing.   In  case  of  contact, immediately  flush  skin  or eyes  with water for  at  least  15 minutes.   Get medical  attention  for eyes. b. Apply  a  thin  mist  coat  of  epoxy  primer (E292.1).  Wear gloves  (E184.1).  Allow to  air dry  for  1  hour. Naphtha  (E245) is  combustible  and toxic.   It can  irritate  skin  and  cause burns.   Use  only  with  adequate ventilation, away  from  heat.   In  case of  contact,  immediately  flush  skin or  eyes  with  water  for at  least  15 minutes.   Get  medical  attention  for eyes. Use  only  aliphatic  naphtha  IT-N-95 (E245).  Other types  can  contaminate blade  surface. NOTE If lacquer finish  is  applied  within  2 hours  after  epoxy  primer,  cleaning with  aliphatic naphtha  is not required. 5-318







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.