REPLACE NICKEL EROSION CAP (AVIM) (Continued)
Check that erosion cap (3) is flush with titanium
cap. Check that cap (3) is flush with tip cover
(19). Blend if necessary. Use file.
Sealant (E336) can irritate skin and
cause burns. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Remove squeezed out adhesive. Use abrasive
paper (E9). If needed, clean with cloth (E120)
soaked in acetone (E20). Wear gloves (E184.1).
Apply a bead of sealant (E336) to fill in
imperfections, if needed.