REPLACE FIXED DROOP STOP
Ensure that droop stops are always
installed with new bolts.
Prior to installation, measure new bolt
to insure bolt is the proper length
0.912 ±0.015 inches (measured from
under the head of bolt to the end of
Install washers (5) and new bolts (4).
On aft rotor, torque bolts (4) to 70 inch-pounds.
On forward rotor, torque bolts to 70 inch-pounds.
Have helpers lower blade (1).
Lockwire two bolts (4). Use lockwire (E229).
Install aft droop stop shroud (Task 5-48.5).
Close work platform (Task 2-2).
END OF TASK