TM 55-1520-240-23-4
5-40
REMOVE HORIZONTAL HINGE PIN BEARING CAP
(Continued)
5-40
3.
Remove locking beam (4) and laminated shim
(5), if installed.
4.
Install torque wrench socket (T5) (6) on bearing
cap (2).
4.1.
Install bolt (7), with washer (8) in wrench socket
(6). Hand-tighten bolt.
4.2.
Install socket (9) over hex of wrench socket (6).
5.
Remove bearing cap (2). Use 3/4 inch drive
handle.
5-175