TM 55-1520-240-23-4
5-31
INSTALL VERTICAL HINGE PIN OIL MANIFOLD TUBE
5-31
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powertrain Repairers Tool Kit, NSN
5180-00-003-5267
Torque Wrench, 0 to 150 Inch-Pounds
Rawhide Mallet
Materials:
Lockwire (E231)
Lubricating Oil (E254/E254.1)
Parts:
Packings
Personnel Required:
Aircraft Powertrain Repairer (2)
Inspector
References:
TM 55-1520-240-23P
Task 1-58
Task 5-29
General Safety Instructions:
Oil (E254/E254.1) is toxic. It can
irritate skin and cause burns. Avoid
inhaling. Use only with adequate
ventilation. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes for
at least 15 minutes. Get medical
attention for eyes.
NOTE
Procedure is same to install any
vertical hinge pin oil manifold tube.
1.
Lubricate oil manifold tube (1) and four packings
(2). Use oil (E254/E254.1). Position packings
in grooves (3) on tube.
5-151