TM 55-1520-240-23-3
4-95
INSTALL OIL PUMP ON NO. 2 POWERPLANT
(Continued)
4-95
2.
Connect electrical harnesses (2 and 3) to
connector (4 and 5) on shelf (6). Lockwire
connector (12). Use lockwire (E231).
3.
Remove plugs from hoses (7 and 8). Connect
hoses to ports (9 and 10) on fuel pump (11).
Make sure hoses and harnesses
cannot chafe against each other.
Chafing can cause damage to hoses
and harnesses.
INSPECT
FOLLOW-ON MAINTENANCE:
Install No. 2 gas producer tachometer generator
(Task 8-13).
Close engine access cover (Task 4-50).
Close engine work platform (Task 2-2).
END OF TASK
4-358