TM 55-1520-240-23-3
4-42
REPAIR CONNECTING LINK (DRAG STRUT) AND ENGINE MOUNT FITTINGS
(AVIM)
(Continued)
4-42
h.
Coat inside of holes (7) in lugs (12 and 15)
with epoxy primer (E292). Wear gloves
(E184.1).
NOTE
Bushings must be installed while
epoxy primer (E292) is still wet.
i.
Install new shoulder and shoulderless
bushings (1 and 2) in lugs (12 and 15) of link
(3).
j.
Wipe off any excess primer (E292) from lugs
(12 and 15). Use cloths (E135).
2.
Replace slotted bushing (27) in link (3) as follows:
4-224
