TM 55-1520-240-23-3
4-34
INSTALL FORWARD ENGINE MOUNT CAP ASSEMBLY
(Continued)
4-34
NOTE
This procedure can be used to install
forward engine mounts on No. 1 or
No. 2 engine. Forward engine mounts
on the No. 2 engine are shown here.
INSTALL INBOARD MOUNT
1.
Position cap (1) between lugs (2).
2.
Install bearing (3) in cap (1) so shoulder of
bearing is facing inboard.
3.
Install slip-fit bushing (4) in hole in lug (2).
4.
Install bolt (5) and washer (6), bolt head inboard.
5.
Install washer (6), lockwasher (7), and nut (8)
on bolt (5).
6.
Torque nut (8) on inboard mount to 350
inch-pounds. Make sure bearing (3) is tight.
7.
Bend tab on lockwasher (7) flat over nut (8).
4-178