TM 55-1520-240-23-3
4-28
INSPECT FORWARD ENGINE MOUNT PARTS
(Continued)
4-28
INSPECT INBOARD MOUNT PARTS
6.
Clean bearing (12) and cap (13) with dry cleaning
solvent (E162) and cloths (E135). Wear gloves
(E186).
7.
Measure inside diameter of bearing (12).
Diameter shall not be more than 0.6276 inch.
8.
Measure diameter of bolt (14). Diameter shall
not be less than 0.6225 inch.
9.
Measure outside diameter of bushing (15).
Diameter shall not be less than 0.8127 inch.
10.
Measure inside diameter of bushing (15).
Diameter shall not exceed 0.6270 inch.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
4-155