TM 55-1520-240-23-3
4-14.2
INSTALL POWER TURBINE INLET TEMPERATURE (PTIT) WIRE HARNESS
4-14.2
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powerplant Mechanics Tool Kit, NSN
5180-00-323-4944
Materials:
None
Personnel Required:
Aircraft Powerplant Repairer
References:
TM 55-1520-240-23
Equipment Condition:
Battery Disconnect
Electrical Power Off
NOTE
Procedure is same to install PTIT wire
harness in No. 1 or No. 2 engine. No.
2 engine is shown here.
NOTE
Ensure that harness does not chafe
against clamps or other engine
components.
1.
Install clamps (1 and 2) on PTIT wire harness (3)
and flexible hose (4). Secure clamps (1 and 2)
with screw (5) and nut (6).
2.
Install clamps (7 and 8) on PTIT wire harness (3)
and flexible hose (4). Secure clamps (7 and 8)
with screw (9) and nut (10).
2.1.
Install clamps (6.1 and 6.2) on PTIT wire harness
(3) and flexible hoses (6.3). Secure clamps (6.1
and 6.2) with screw (6.4) and nut (6.5).
3.
Install connectors (11 and 12).
FOLLOW-ON MAINTENANCE:
Battery connected (Task 1-39).
Close engine access cover (Task 4-50).
END OF TASK
4-126