• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
DISASSEMBLE  POWERPLANT (Continued) - TM-55-1520-240-23-3_303
DISASSEMBLE  POWERPLANT (Continued) - TM-55-1520-240-23-3_305

TM-55-1520-240-23-3 CH-47D Heilcopter Manual
Page Navigation
  273    274    275    276    277  278  279    280    281    282    283  
TM  55-1520-240-23-3 4-11 DISASSEMBLE  POWERPLANT (Continued) 4-11 25. Connect  hoist  (81) to  eye  (77) of sling  (72). 26. Loosen  four bolts (82) on  adapter fitting  (83) and push  down  to  side. 27. Raise  hoist (81)  to  support weight  of powerplant (70).  Remove  pin  (84) from  adapter  fitting  (85) and  aft  mount  link  (86). Powerplant  is  heavy  and  can  injure personnel  if  it drops.   Personnel  must stay  clear when  powerplant  is raised. Make  sure  bearing  in  lower  end  of aft  support  link does not  tilt  in  clevis, while  weight  of  engine  is supported. If bearing  tilts, it  will  wedge  in  clevis, causing  damage to  bearing and  clevis. 28. Raise  hoist  (81)  so  forward  engine  mount adapters  (87) and  aft engine  mount  link  (86) are clear of  adapter (71).  Make  sure  bearing  (88) in aft  engine  mount  link  (86)  does  not  tilt  in  clevis (89). 4-66







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.