TM 55-1520-240-23-3
4-10.1
REMOVE POWERPLANT
(Continued)
4-10.1
NOTE
Procedure is same for removing No.
1 or No. 2 powerplant except as
noted. Removal of No. 2 powerplant
is shown here.
Trailer adapter (T16) is recommended
if powerplant is to be transported over
rough ground.
All points of engine disassembly for
engine removal must be painted
international orange with a band of
paint not exceeding 1.00 inch in
width.
REMOVE POWERPLANT WITH ENGINE
TRANSMISSION INSTALLED
1.
If powerplant (1) is to be stored, prepare for
storage before removal (TM 1-2840-265-23).
2.
Disconnect two fire detection elements (2) from
receptacles (3) on fuselage. Make sure insert
(4) stays in receptacles. Cap elements and
receptacles.
3.
Tag (E264) and disconnect ten hoses (5) and
four cable connectors (6) from shelf (7).
4-53