TM 55-1520-240-23-3
3-70
INSTALL STEERING LEVER
(Continued)
3-70
10.
Install two washers (12) and nuts (11) on bolts
(14).
11.
Torque two nuts (11) to 35 inch-pounds above
run-on torque.
12.
Install washer (16) and nut (17).
13.
Torque nut (17) 290 to 410 inch-pounds.
14.
Install cotter pin (18).
15.
Make sure rod-end (15) is free on stud and that
rod is not bent.
INSPECT
FOLLOW-ON MAINTENANCE:
Close aft landing gear panels (Task 2-2).
Perform operational check of power steering (TM
55-1520-240-T).
END OF TASK
3-187/(3-188 blank)