TM 55-1520-240-23-3
3-61
REMOVE SWIVEL HOUSING AND SPINDLE
(Continued)
3-61
10.
Remove lockwire, nut (18), and clamp (19) from
spindle (20)
11.
Loosen nut (21), and disconnect brake tube (22)
from elbow (23).
12.
Loosen nut (24) and remove elbow (23), retainer
(25), and packing (26).
13.
On left gear only, remove static ground wire (27)
(Task 3-37).
14.
Have helper hold swivel housing (3).
15.
Remove cotter pin (28), nut (29), washer (30),
and bolt (31). Remove shock strut (32) from
fitting (33) on lower drag link (34).
16.
Remove cotter pin (35), nut (36), washer (37),
and bolt (38) from upper drag link (39).
17.
Disconnect and tie drag link (39) out of way. Use
twine (E433).
3-157