INSTALL AFT LANDING GEAR LUBRICATION FITTINGS
Install two fittings (3) in aft trunnion (4).
Sealant (E345.1) can irritate skin and
cause burns. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Apply sealant (E345.1) to thread of fitting (5)
and, if being installed, adapter (6).
If required, install adapter (6) in swivel housing
Hold adapter (6) with wrench. Install fitting (5) in
adapter. Final position of fitting shall leave nipple
(8) between 4 and 5 oclock position.
Lubricate aft landing gear (Task 1-88).
Close aft landing gear access panel (Task 2-2).
END OF TASK