• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
INSTALL EMERGENCY  EXIT LIGHT  PANEL AND PAN
REMOVE  INERTIA SWITCH

TM-55-1520-240-23-11 CH-47D Heilcopter Manual
Page Navigation
  18    19    20    21    22  23  24    25    26    27    28  
TM  55-1520-240-23-11 17-10 INSTALL  EMERGENCY EXIT LIGHT PANEL AND PAN (Continued) 17-10 NOTE Procedure  is  same  to  install any  exit light  panel  and  pan.  Panel  and  pan above  escape  hatch  are  shown  here. 1. Route  wires  (1)  through  pan  (2).   Connect  three wires  to  back  of  panel  (3)  with  screws  (4)  and washers  (5).   Remove  tags. 2. Position  pan  (2)  and  panel  (3)  on  structure  (6). Install  three  screws  (7)  and  washers  (8). 3. Tighten  clamp  (9),  if  loosened. 4. Install  blankets  (10)  if  removed  (Task  2-210). FOLLOW-ON  MAINTENANCE: Install  emergency  exit  light  (Task  17-8). Stow  work  platform  (Task  2-244)  (for  ramp  panel). Install  left  ramp  extension  (Task  2-244)  (for  ramp panel). Close  ramp  (Task  2-2)  (for  ramp  panel). END  OF  TASK 17-26







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.