TM 55-1520-240-23-10
16-66
INSTALL LITTER SUPPORT STRAP
16-66
INITIAL SETUP
Applicable Configurations:
All
Tools:
None
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Referances:
TM 55-1520-240-23P
1.
Connect strap (1) supports (2) inboard, to
support bracket (3).
2.
Adjust strap (1) so that strap supports (2) are
same height as corresponding supports (4) on
litter pole (5).
3.
Release locking handle (6) and lift locking bar
(7). Install litter handles (8) in strap supports (2).
4.
Insert locking bar (7) into slot in locking handle
(6). Lift handle to lock position.
5.
Position lower attachment fitting (9) on adapter
(10). Press inward on spring lever (11) and
install fitting.
6.
Adjust buckle (12), above lowest support (2) to
remove slack in strap (1).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
16-261/(16-262 blank)