16-59.15 AN/ALE-47 PAYLOAD MODULE UNLOADING (Continued)
If there is an indication that a misfire
occurred, notify EOD personnel for
disposal after removal. Failure to
comply could result in death or injury
to personnel or damage to equipment.
Place payload module assembly (5) so that
retaining plate (2) is facing up.
Remove two screws (1) securing retaining plate
(2) to payload module assembly (5). Remove
retaining plate (2).
Use care when removing impulse
cartridges and flares to prevent
damage to payload module or flare
Remove impulse cartridges (3) from unexpended
Remove flares (4) from payload module (5).
Inspect unexpended flares and impulse
cartridges for serviceability prior to storage. If
flares or cartridges are found to be unserviceable,
notify EOD personnel for disposal.
Install payload module (Task 16-59.13).
END OF TASK