TM 55-1520-240-23-10
16-47
INSTALL PARATROOP ANCHOR LINE
(Continued)
16-47
NOTE
Make sure there is enough slack in
anchor line wire rope to install bolt. If
not, loosen turnbuckle.
2.
Install connect links (7) to fitting (8). Install two
washers (9), bolt (10), and nut (11).
3.
Tighten wire rope (2) with turnbuckle (12). Do
not let wire rope sag more than 6 inches.
4.
Install lockwire (E230) on turnbuckle (12).
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
16-223/(16-224 blank)