ADJUST FORWARD OR AFT CARGO HOOK MANUAL RELEASE CABLE
Check clearance between ball end (9) and
surface X of release arm (10) at each cargo
hook. Clearance shall be 0.00 to 0.20 inch.
If gap is not within limits, remove lockwire, loosen
locknut (11), and adjust cable clevis (12) at
Check for proper thread engagement at clevis
(12). Minimum engagement is cable threaded
end visible through witness hole in clevis.
Tighten locknut (11) against clevis (12). Lockwire
locknut and clevis together. Use lockwire (E231).