TM 55-1520-240-23-10
16-15
REMOVE FORWARD OR AFT CARGO HOOK SOLENOID COVER OR WIRE
HARNESS
(Continued)
16-15
NOTE
Wires are identified at manufacture.
Before disconnecting any wire, make
sure wire is identified.
3.
Move solenoid cover (4) enough to gain
access to harness wires (5). Disconnect eight
harness wires (5) from modules (6). Use
insertion/extraction tool.
4.
Cut and remove strap (7). Remove solenoid
cover (4) from cargo hook (8).
5.
Remove gasket (9) from cargo hook (8).
6.
Remove lockwire from four screws (10). Remove
four screws (10), four washers (11), and wire
harness (12) from solenoid cover (4).
7.
Remove gasket (13) from wire harness (12).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
16-104