TM 55-1520-240-23-10
16-11
INSPECT FORWARD AND AFT CARGO HOOKS
(Continued)
16-11
7.
Check thru inspection window (8) that hook
linkage is locked. Refer to decal (9) on side of
hook (5).
8.
Remove lockwire and loosen two bolts (10).
9.
Swing window (8) down to clear release arm (11).
10.
Check clearance between ball end (12) and
surface X of arm (11). Clearance shall be 0.00
to 0.20 inch.
10.1.
If gap is not within limits, adjust forward or aft
cargo hook manual release cable (Task 16-35.1).
11.
Position window on bolt (10). Torque bolts to 40
inch-pounds.
12.
Lockwire bolts (10). Use lockwire (E231).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
16-97