TM 55-1520-240-23-10
15-7
INSTALL APU AFT MOUNT CONNECTING LINKS
15-7
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Workstand
Materials:
Lockwire (E231)
Personnel Required:
Medium Helicopter Mechanic (2)
Inspector
References:
TM 55-1520-240-23P
INSTALL APU VERTICAL AFT MOUNT CONNECTING
LINK
NOTE
Two bushings are installed in fitting
for link alignment.
1.
Remove nut (1), bolt (2), two washers (3), and
washer (3.1) from fitting (4).
2.
Position link (5) in fitting (4). Install bolt (2),
washer (3.1), two washers (3), and nut (1).
3.
Align link (5) with APU mount point (6). Install
(7), washer (8), and washer (8.1). Torque bolt (7)
to 75 to 85 inch-pounds.
4.
Lockwire bolt (7). Use lockwire (E231).
15-32