TM 55-1520-240-23-10
13-39
INSTALL CABIN DUCTING
(Continued)
13-39
10.
Position two support clamps (29) on manifold
duct (30).
11.
Slide hose (31) onto manifold duct (30).
12.
Position manifold duct (30). Slide ends of flex
ducts (16) on manifold duct (30). Install two
clamps (32).
13.
Install screw (33) and washer (34) in each
support clamp (29).
14.
Slide hose (35) or valve duct (36).
NOTE
Some valve ducts have nutplates and
require installation of screws only.
15.
Without nutplates, position valve duct (36)
between manifold duct (30) and transition duct
(37). Install eight screws (38), washers (39), and
nuts (40).
13-128