TM 55-1520-240-23-10
13-6
ASSEMBLE HEATER (AVIM)
(Continued)
13-6
2.
Install clamps (5) over thimbles (3) and tubes (4).
3.
Check that ground electrode (6) is on same side
of combustion chamber (2) as combustion air
inlet connection (7). If not, turn tube and cone
assembly (1) around to adjust.
4.
Install two screws (8) in clamps (5).
5.
Install gasket (9) and combustion plate (10) on
combustion chamber (2).
6.
Install four screws (11) and washers (12).
7.
Install 12 screws (13) and washers (14).
13-29