• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
LUBRICATE  DRIVE  SHAFT BEARINGS
LUBRICATE  SWASHPLATE

TM-55-1520-240-23-1 UH-1H/V and EH-1H Aircraft Manual
Page Navigation
  313    314    315    316    317  318  319    320    321    322    323  
TM  55-1520-240-23-1 1-89 LUBRICATE  DRIVE  SHAFT  BEARINGS (Continued) 1-89 LUBRICATE  FORWARD SHAFT BEARINGS NOTE There  are  six  bearings  on  the  forward drive  shafting.   Lubricate  each  the same  way. 1. Wipe  fitting  (1)  with  a  clean  cloth  (E120). 2. Have  helper  rotate  shaft  by  slowly  pulling  rotor blades around  with  tiedown  line.  As shaft rotates, apply  grease  (E190)  at  fitting  (1)  until  old  grease is  forced  out and  new  grease  appears.   Use  a grease  gun. 3. Wipe  off old  grease  with  cloths  (E120). 4. Repeat  steps  1  thru  4  for  each  fitting  (1). LUBRICATE  AFT SHAFT  BEARINGS 5. Wipe  fitting  (5)  with  a  clean  cloth  (E120). 6. Have  helper  rotate  shaft  by  slowly  pulling  rotor blades around  with  tiedown  line.  As shaft rotates, apply  grease  (E190)  at  fitting  (5)  until  old  grease is  forced  out and  new  grease  appears.   Use  a grease  gun. 7. Wipe  off old  grease  with  cloths  (E120). FOLLOW-ON  MAINTENANCE: Close  aft drive  shaft access  panel  (Task  2-2). Close  forward  drive  shaft  tunnel  access doors  (Task 2-2). END  OF  TASK 1-322







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.