• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
COLD ENVIRONMENT  MAINTENANCE (Continued)
LUBRICATION CHARTS

TM-55-1520-240-23-1 UH-1H/V and EH-1H Aircraft Manual
Page Navigation
  304    305    306    307    308  309  310    311    312    313    314  
TM  55-1520-240-23-1 1-86 COLD  ENVIRONMENT MAINTENANCE (Continued) 1-86 Release  agent (E308) can  form  toxic vapors  if  exposed  to  flame.   Use only with  adequate  ventilation,  away from  open  flame.  In  case  of  contact, immediately flush  skin  or eyes  with water  for  at  least 15 minutes.   Get medical  attention  for eyes. Dry  cleaning  solvent  (E162)  is combustible  and  toxic.  It  can  irritate skin  and  cause  burns.  Use  only  with adequate  ventilation,  away  from  open flame.  In  case  of  contact, immediately flush  skin  or  eyes  with  water for at  least  15  minutes.   Get  medical attention  for  eyes. c. Clean  surfaces of  cabin  door handle  latch  (1) and  handle  recess  (2) in  latch  body of door. Use  cloth  (E120) damp  with  solvent  (E162). Apply release agent (E308) to these surfaces. NOTE Do  not  lubricate  coated  surfaces. d. Renew  coating  when  latches  and  handle release  mechanisms  become  difficult  to operator. 9. Clean  transparent  plastic when  temperature  is below  32ºF (0ºC).  Use  cleaning  and  polishing compound  (E118  or  E282) (Task  2-40). NO  BREAK  -  WORK  HARDER NO  BREAK  -  WORK  HARDER FOLLOW-ON MAINTENANCE: None END  OF  TASK 1-315







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.