• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
1-76 CLEAN  FUSELAGE  EXTERIOR (Continued) - TM-55-1520-240-23-1_315
1-77.1 CLEAN  WINDSHIELD

TM-55-1520-240-23-1 UH-1H/V and EH-1H Aircraft Manual
Page Navigation
  278    279    280    281    282  283  284    285    286    287    288  
TM  55-1520-240-23-1 1-77 CLEAN  PLASTIC-IMPREGNATED GLASS  CLOTH  PARTS 1-77 INITIAL  SETUP Applicable Configurations: All Tools: Maintenance  Stand Materials: Soap  (E352) Naphtha  (E245)  or Dry Cleaning  Solvent  (E162) Cloth  (E120) Flannel  Cloth  (E128) Gloves  (E186) Personnel  Required: Medium  Helicopter Repairer General  Safety  Instructions: Naphtha  (E245)  and  solvent  (E162) are  combustible  and  toxic.  They  can irritate  skin  and  cause  burns.   Use only  with  adequate  ventilation,  away from  open  flame.  In  case  of contact, immediately flush  skin  or eyes  with water  for  at  least  15  minutes.  Get medical  attention  for eyes. NOTE Following  steps  contain  information on  routine  cleaning  where  abrasive polishing  for  removal  of  scratches  is not  required. Naphtha  (E245)  or  solvent  (E162) may be  substituted  for soap  and  water solution. 1. Prepare  mild  solution  of soap  (E352)  and  water. Do  not  use  dirty  or  gritty  cloths, unapproved  cleaning  fluids, compounds,  solvents,  etc., as  they can  damage  the  surface. 2. Saturate  cloths  (E120)  with  solution  and  lightly rub surface.  Wear gloves  (E186) if using  naphtha (E245)  or  solvent  (E162). 3. If  soap  and  water solution  is used,  rinse  surfaces with  a  clean,  water-soaked,  flannel  cloth  (E128). Wipe  surface  dry  with  clean  flannel  cloth. FOLLOW-ON MAINTENANCE: As  Required END  OF  TASK 1-289







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.