LEVEL AND WEIGH HELICOPTER (3-POINT) (AVIM)
Do not lower aft jacks first. Damage
to structure can result.
Lower all three jacks (13 and 17) together, 1 inch
at a time. Lower them until cell (12) on forward
jack is clear of pad. Move jack and cell clear of
Remove tiedown chain (10) from axle housings
(8) on each side of helicopter.
Aft landing gear can be damaged
if static locks are not released and
stowed before gear are lowered all
Lower both aft landing gear evenly until wheels
touch ground. Release static gear lock (19) from
lug (20) on each gear. Secure in stowed position
with pin (21).